Heath Zenith 595-5684-09 Door User Manual


 
-3-
595-5684-09
Yourwirelesschimehasdifferentselectabletunes:Ding (one note), Ding-Dong
(twonote),orWestminster (eight note) (Available on selected chimes). The
factorysettingisfortheDing-Dongtune(orWestminster,whenavailable).This
tunecanbechangedbyfollowingtheinstructionsbelow.
• Ding (one note tune)
 InsidePushButton:Addajumpertolocation8.
• Ding-Dong(twonotetune)
 InsidePushButton:Removejumperfromlocation8.
Chime: Remove jumper from location 8.
• Westminster (Eight note tune) (Available on selected chimes)
 InsidePushButton:Removejumperfromlocation8.
Chime: Add a jumper to location 8.
Note:Allmodelshavebothfrontandbackdoortunecapabilities.Werecommend
the back door use the Ding tune and the front door use the Ding-Dong tune
(or Westminstertune,availableonselectedchimes).Modelsthatincludetwo
pushbuttonswillcomefactorysetforfrontandbackdoors.Decalsontherear
ofthepushbuttonwillindicateitssetting.
Note: Some models might require the use of
tweezerstoremoveandreplacethejumpers.
Figure 4
1 2 3 4 5 6 7 8
InsidePush
Button
Tune Setting
12345678
Removescrewto
open access door
BackofChime
Tune Setting
(Not used on all
models)


reconnecting to power.
Tune Settings