Heath Zenith 595-5684-09 Door User Manual


  Open as PDF
of 24
 
© 2008 HeathCo LLC 595-5684-09
Wireless Plug-In
Chime
This package includes (Style of push button and
chime may vary from illustration):
• Wirelessplug-inchime
• Wirelesspushbuttonwithbattery(Specic
models include 2)
• Hardwarepack
1. Install alkaline type A23 12 volt push button
battery (included). Remove back of case by
pushingintabonbottomwithasmallscrew-
driver (see Figure 1). See diagram inside push
button for correct battery orientation. Note: If
batteries are preinstalled, remove orange
battery tab.
2. Plug in wireless chime. To reduce the risk of
electrical shock, this equipment has a polar-
izedplug(onebladeiswiderthantheother).
Thisplugwilltinapolarizedoutletonlyone
way.Iftheplugdoesnottfullyintheoutlet,
reversetheplug.Ifitstilldoesnott,contacta
qualiedelectriciantoinstalltheproperoutlet.
Do not attempt to bypass this safety feature.
3.
Test range. Temporarily position push button
whereyouwantitmounted.Presspushbutton
toverifychimeandpushbuttonworkproperly.If
chime does not sound, see Troubleshooting.
Figure 1
WARNING: To prevent possible SERI-
OUS INJURY or DEATH:
  
batteries.
 

next