Filter
Top Products
-3-598-1076-03
12345678
12345678
Inside Push
Button
Push Button Battery Replacement
Install an alkaline type A23 12 Volt bat
-
tery. See diagram inside push button for
correct battery orientation.
* Code Settings 1-7 Must
Match Both Push Button
and Chime
Remove screw to
open access door
Back of
Chime
• Ding (one note tune)
Push Button: Add a jumper to location 8.
• Ding-Dong (two note tune)
Push Button: Remove jumper from location 8.
Chime: Remove jumper from location 8.
• Westminster (Eight note tune) (Available on selected chimes)
Push Button: Remove jumper from location 8.
Chime: Add a jumper to location 8.
Note: All models have both front and back door tune capabilities. You
may purchase any ACE
®
wireless push button for a second entrance.
We recommend the back door use the Ding tune and the front door
use the Ding-Dong tune (or Westminster tune, available on selected
chimes). Models that include two push buttons will come factory set
for front and back doors. Decals on the rear of the push button will
indicate its setting.
Note: Some models might require the use of
tweezers to remove and replace the jumpers.
Tune Setting
(Not used on
all models)
Tune Setting