Filter
Top Products
Service Manual 17
Installation
The wall you select should be strong and solid
enough to prevent vibration
1. Mount the installation plate on the wall with
type "A" screws. If mounting the unit on a concrete
wall, use anchor bolts.
• Mount the installation plate horizontally by aligning
the centerline using a level.
2. Measure the wall and mark the centerline. It is also
important to use caution concerning the location of
the installation plate. Routing of the wiring to power
outlets is through the walls typically. Drilling the
hole through the wall for piping connections must
be done safely.
Fixing Installation Plate
Installation Plate
Type "A" screw
Chassis
Hook
Installation plate
Left rear piping Right rear piping
Ø70mm
(Ø2.75inch)
Ø70mm
(Ø2.75inch)
D
B
A
C
ABCD
S4 50(1.97) 105(4.13) 59(2.32) 105(4.13)
CHASSIS
(Grade)
Distance (mm/inch)