Heat Controller DMC24DB-1 Air Conditioner User Manual


 
Installation Manual 7
Installation
Operation
Do not direct airflow at
room occupants.
This could damage your health.
Do not use the product for
special purposes, such as
preserving foods, works of
art, etc. It is a consumer air
conditioner, not a precision
refrigeration system.
There is risk of damage or loss
of property.
Do not block the inlet or
outlet of air flow.
It may cause product failure.
90°
Do not install the product
where the noise or hot air
from the outdoor unit could
offend the neighbors.
It may cause a problem for your
neighbors.
Use two or more people to
lift and transport the air
conditioner
Avoid personal injury.
Do not install the product
where it will be exposed to
sea wind (salt spray)
directly.
It may cause corrosion in the
product. Corrosion, particularly
on the condenser and
evaporator fins, could cause
product malfunction or inefficient
operation.
Always check for
gas(refrigerant) leakage
after installation or repair of
product.
Low refrigerant levels may
cause product failure.
Install the drain hose to
ensure that water is drained
away properly.
A bad connection may cause
water leakage.
Keep level even when
installing the product.
To avoid vibration or water
leakage.