Filter
Top Products
—16—
Remove the backing from vertical and horizontal insulation and
attach them to the inside of the wall sleeve as shown below.
Remove the backing from the support blocks and attach them
to the inside of the wall sleeve as shown below. Slide the
baffles in the slots of the support blocks.
3.3.2 UNIT INSTALLATION
1. Remove the backing from vertical insulation and attach them
to the back of the unit as shown below.
2. Install the new unit into the wall sleeve.
3. Insert front insulation between the wall sleeve and the unit.
A flat-bladed screwdriver or putty knife is recommended.
4. To assemble trim, insert the snaps into the slots of others.
To install trim to the sleeve, slide the trim through the unit
until it is flush with the wall sleeve.
Wall
Trim (2 ea)
Wall
Wall Sleeve
Vertical
Insulation
Front
A
B
Wall
Wall
Sleeve
Insulation
Horizontal
A+
1
/4"
(6 mm)
B+
1
/4"
(6 mm)
Insulation
Vertical
Front