Filter
Top Products
- 74 -
Wall Mounted Multi-Zone Split System Air Conditioner
Troubleshooting Guide
Error
Description Cause of error Check point & Normal condition
code
33 D-Pipe Temp. High
• Discharge sensor
temp. high
• Check the discharge pipe sensor.
• Check the install condition for over load.
• Check for leakage of refrigerent.
• Check is the Service Valve (SVC V/V) is open.
Error
Description Cause of error Check point & Normal condition
code
51 Capacitor error
• Over Capacitor com-
bination
• Check the indoor unit capacity.
• Check the combination table
❑ Check Point
1. Check the indoor unit capacity.
2. Check the combination table.
➔ single cycle has no error for over capacity.
❑ Check Point
1. Check the install condition for over load.
2. Check is the Service Valve (SVC V/V) is open.
3. Check for leakage of refrigerent.
4. Check the constant compressor.
COMP OFF
LEV OPEN(16PULSE/MIN)
LEV OPEN(10PULSE/MIN)
NORMAL
115°C(239°F)
100°C(212°F)
95°C(203°F)