Filter
Top Products
- 44 -
Wall Mounted Multi-Zone Split System Air Conditioner
Operation
• If the appliance is paused at the time set by the timer, the pause continues.
■ Off-Timer <=> On-Timer Operation
• When the set time is reached after the on/off time is input by the remote control, the on/off-timer operation is
carried out according to the set time.
■ Sleep Timer Operation
• When the sleep time is reached after <1,2,3,4,5,6,7,0(cancel) hr> is input by the remote control while in appli-
ance operation, the operation of the appliance stops.
• While the appliance is paused, the sleep timer mode cannot be input.
• While in cooling mode, 30 min later the start of the sleep timer, the set point temperature increases by
1°C(33.8
°F)
. After another 30 min elapse, it increases by 1°C(1.8
°F)
again.
• When the sleep timer mode is input while in cooling mode, the airflow speed of the indoor fan is set to the low.
• When the sleep timer mode is input while in heating mode, the airflow speed of the indoor fan is set to the
medium.
■ Chaos Swing Mode
• By the Chaos Swing key input, the upper/lower vane automatically operates with the Chaos Swing or they are
fixed to the desired direction.
• While in Chaos Swing mode, the angles of cooling and heating cycle operations are different.
■ Chaos Natural Wind Mode
• When the Chaos Natural Wind mode is selected and then operated, the high, medium, or low speed of the air-
flow mode is operated for 2~15 sec. randomly by the Chaos Simulation.
■ Jet Cool Mode Operation
• While in heating mode or Fuzzy operation, the Jet Cool key cannot be input. When it is input while in cooling,
dehumidification, ventilation the Jet Cool mode is operated.
• In the Jet Cool mode, the indoor fan is operated at super-high speed for 30 min in cooling mode.
• In the Jet Cool mode operation, the room temperature is controlled to the set point temperature, 18°C(64.4
°F)
.
• When the sleep timer mode is input while in Jet Cool mode, Jet Cool mode has the priority.
• When the Jet Cool key is input, the upper/lower vanes are reset to those of the initial cooling mode and then
operated in order that the air outflow could reach further.
■ Auto Restarting Operation
• When the power is restored after a sudden power failure the appliance is in operation, the mode before the
power failure is kept in the memory. Because of this feature, the appliance automatically operates in the
mode on the memory.