Filter
Top Products
9
Rough In
Measurements
Dimensions
Clearances to Combustibles
Listed Double Wall Chimney Connector
All measurementrs must be done before starting the intsallation.
All drawings are for reference only, showing approximate dimensions for rough-in purposes.Ins
ome installations, two or more clearances to combustible walls may contradict each other. The
clearance with the greater numerical value is to be used
Non combustible hearth must extend 8 inches (203mm) to the sides and back of the unit. Must
extend 21 inches (534mm) to the front in Canada and 18 inches (458mm) to the front in U.S.
Hearth must extend fully to the wall if using clearances that are less than these dimensions.