Filter
Top Products
Quadra-Fire • QFP44 • 4051-300 • Rev N • 11/0854
Figure 14.7 Adjust the Vertical Baffl e
Figure 14.8 Positioning Rear Log
F. Install Logs, Ember Bed & Rockwool
• Remove the grate from the hearth by removing the
screws.
• Position rear log over the locating tabs at the rear of the
hearth pan. See Figure 14.8.
E. Adjust the Vertical Baffl e
If the vertical run height is more than 12 feet, it may be
necessary to install the vertical baffl es that are included
with the unit to improve the fl ame appearance. Install
each baffl e to cover the outside two slots in the lower
fi rebox top. See Figure 14.7.
Figure 14.9 Positioning Ember Bed
• Position ember bed over the burner locating the corners
inside the brackets. See Figure 14.9.
• Position the grate in the recess of the ember bed
and attach to the hearth with the screws. See Figure
14.10.
Figure 14.10 Positioning Grate
• Position the cut out on the left front log over the grate
bar. See Figure 14.11.
Figure 14.11 Positioning Left Front Log