Filter
Top Products
Quadra-Fire • Hudson Bay Insert • 7008-115 Rev. H • 10/08 19
G. Positioning the Logs
While still breakable, the logs do not become fragile until
after the appliance is burned and they have cured. After
curing, any handling must be done with care as breakage
can easily occur.
Figure 8.16
Figure 8.19
Figure 8.17
Figure 8.20
Figure 8.18
Figure 8.15
Note: Logs have been designed to work specifi cally with the
burner of this appliance. Exact placement will ensure proper
operation of your gas appliance and reduce sooting.
Note: For the Hudson Bay Insert the lower brick retainer is
used.
REAR BRICK
REAR BRICK
RETAINING TABS
RETAINING TABS
Complete log installation.
4
4
5
5
6
6
3
3
Logs installed in fi rebox. Logs #1 and #2 are part of the
burner pan and are numbered for reference only.
6
6
3
3
1
1
2
2
4
4
5
5
Install the left rear log (#3) over the locator pins in the
burner pan.
Install the right rear log (#4) over the locator pins in the
burner pan.
Install the right twig (#5) over the locator pins in the right
rear log and right front log.
Note: Locator pins are included in the log component
package.