Filter
Top Products
10/08
Page 29Quadra-Fire • Hudson Bay • 7003-121 Rev. i
Figure 8.8 Keeping the baffl e elevated with your free hand,
put the right side brick into position. Rest the baffl e on the
right side brick.
Figure 8.9 Still holding the baffl e in place, install the left brick
into position.
E. Brick Set Installation
Figure 8.7 To install the baffl e, slide it in at an angle and rotate
upward parallel with the fi rebox. Place baffl e up against
the heat exchangers in top of fi rebox. Holding against heat
exchangers, slide baffl e towards front of appliance.
D. Grille Installation
Figure 8.5 Following instructions stated above, remove the
door of appliance.
Remove the four screws (two at each end) holding the grille
in place. Lift up to remove.
Install the new grille by reversing the removal instructions.
NOTE: Clean glass and gold or nickel plating with glass
cleaner and a soft cloth, wiping off all fi ngerprints prior to fi rst
fi re to prevent permanent staining.
Figure 8.6 The pilot shield has to be removed to install or
remove the brick refractory. Removal of the bracket requires
removing two screws.
Pilot Bracket
Pilot
Shield