Filter
Top Products
Hearth & Home Technologies • BE-36-C, BE-36-CIPI • 397-981 Rev. R • 2/05
35
Placing the Ember Material
Ember material is shipped with this gas fireplace. The bag
labeled Glowing Ember (050-721) is standard glowing ember
material. To place the ember material:
• Remove the top louver by lifting it up and away from the unit.
• Unlatch the latches at the top and bottom of the glass door.
• Remove the glass door from the unit (see Figure 38).
• Place dime size pieces of ember material about 1/2 inch
apart near port holes in burner top. Do NOT press embers
into burner ports. Cover the top of the burner with a single
layer of ember material. For best performance do NOT
place embers on the ports at the rear of the burner (see
Figure 39).
Figure 38. Glass Assembly
Figure 39. Placement of the Ember Material
EMBER MATERIALS
LATCHES
(BOTH TOP
AND BOTTOM)
GLASS
ASSEMBLY
• Save the remaining ember materials for use during fire-
place servicing. The bag of embers provided is sufficient
for 3 to 5 applications.
• Reinstall and latch the glass door and top louver on the unit.
CAUTION: THE GLASS DOOR MUST BE SECURELY
LATCHED BEFORE OPERATING THE UNIT.
GLASS SPECIFICATIONS: TEMPERED
This fireplace is manufactured with tempered glass may be
installed in hazardous locations such as bathtub enclosures
as defined by the CPSC. The tempered glass has been
tested and certified to the requirements of ANSI Z97.1-1984
and CPSC 16 CFR 1202. (Safety Glazing Certification
Council SGCC # 1595 and 1597. Architectural Testing,
Inc. Reports 02-31919.01 and 02-31917.01.)
This statement is in compliance with CPSC 16 CFR Section
1201.5 “Certification and labeling requirements” which refers
to 15 USC 2063 stating “…Such certificate shall accompany
the product or shall otherwise be furnished to any distributor
or retailer to whom the product is delivered.”
Some local building codes require the use of tempered glass
with permanent marking in such locations. Glass meeting
this requirement is available from the factory. Please contact
your dealer or distributor to order.