Filter
Top Products
KK-K9-F14-K_INST_11-08
7
Hinge up window
guard and reattach to
This is not used for the
standard length
Expedition.
bracket with 10-32 x
½” Stainless machine
Standard
door panel
screws and #10 Flat
washers.
NOTE: Door panel
EL
fillers are provided for
the Expedition EL.
8. Final Installation Steps:
• Mount dome light switch box. A switch box is pr
housing in various locations. (At topside of
• Wire to 12-volt power source on as preferred.
• Sheet metal seams and gaps need to be SI
compartment will eliminate water from
• Allow silicone to dry overnigh
ovided so switch can be mounted to K9
driver-side tunnel housing works well).
LICONED along floor area. Proper sealing of
getting under the K9 unit.
t then place rubber floor mat.
KK-K9-F14-K Installation Complete