Filter
Top Products
21
Save These Instructions 3-90-798 Dry Seasoned Wood Only!
1. An outside air inlet must be provided for combus-
tion air, and must remain clear of leaves, debris,
ice, and/or snow. The outside air path must be
unrestricted while the appliance is in operation.
2. The combustion air intake system must be of
metal construction. It must permit zero-clearance
to combustible materials, and contain a rodent
screen.
3. The appliance must be secured to the mobile
home structure by bolting it to the oor. There are
brackets included, you'll need to secure with the
proper length lag bolts.
4. The appliance must be grounded to the metal
framing of the mobile home
5. All clearances to combustibles and oor protection
requirements must be followed.
6. Follow the vent manufacturer's instructions when
installing in a mobile home.
7. Installation shall be in accordance with the Manu-
factured Home and Safety Standard (HUD) CFR
3280, Part 24
8. The appliance must never be installed in a room
designated for sleeping.
This diagram shows the bracket that was used
to bolt the stove to the pallet. Use at least two
of these brackets for securing the appliance
through the oor in a mobile home installation.
The bracket will slip over the top of the leveling
adjuster. The installer will need to determine and
obtain the properly sized lag bolts.