Filter
Top Products
Page 2SKU 95811
For technical questions, please call 1-800-444-3353.
SPECIFICATIONS
Materials
Steel housing with steel lens rings and steel, rubber supported mounting
bracket
Dimensions
7” high at the bracket (mounted/surface)
8-1/2” overall height with bracket mounted
4-5/8” Deep
Voltage 12 VDC
Wire connectors 6” pigtail with split-loom and brass bullet connectors. (Not a fused system)
Finish Chrome housing and hardware. Silver reflector with clear (round) glass lens
Hardware Yellow-zinc plated
Weight about 2 lb.
Bulb H-3/55W Halogen (HT201)
Save This Manual
You will need this manual for the safety warnings and precautions, assembly, oper-
ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Write the product’s serial number in the back of the manual near the assembly
diagram, or write month and year of purchase if product has no serial number. Keep this
manual and invoice in a safe and dry place for future reference.
SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
This 6” Off Road Light requires complete installation. It is important that you
read the entire manual to become familiar with this product before it is installed or
used. If you DO NOT have experience doing this type of electrical work, the job
should be done by a qualified automotive or electrical service technician.
Keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents.
Wear ANSI-approved safety goggles and heavy-duty work gloves during in-
stallation or service.
Make certain the vehicle’s engine is turned off and the battery is disconnected
before installing.
1.
2.
3.
4.