Filter
Top Products
Page 3SKU 95588
For technical questions, please call 1-800-444-3353.
Use safety equipment. Always wear eye protection. Always wear ANSI-approved
safety goggles when performing maintenance on this product.
Do not force the product. Use the correct product for your application. The
correct product will do the job better and safer at the rate for which it is designed. Do
not force the product and do not use it for a purpose for which it is not intended.
Do not use this product if the Power Switch does not turn it on or off. Any
product that cannot be controlled with the Power Switch is dangerous and must be
replaced.
Store idle products out of reach of children and other untrained persons. This
product is dangerous in the hands of untrained users.
Use only accessories that are recommended by the manufacturer for your
model. Accessories that may be suitable for one product may become hazardous
when used on another product.
When servicing a product, use only identical replacement parts. Follow
instructions in the “Inspection, Maintenance, And Cleaning” section of this
manual. Use of unauthorized parts or failure to follow maintenance instructions
may create a risk of electric shock or injury.
Maintain labels and nameplates on the product. These carry important informa-
tion. If unreadable or missing, contact Harbor Freight Tools for a replacement.
Maintain a safe working environment. Make sure there is adequate surrounding
workspace. Do not use this product in a damp or wet location.
People with pacemakers should consult their physician(s) before using this
product. Electromagnetic fields in close proximity to a heart pacemaker could cause
interference to or failure of the pacemaker. In addition, people with pacemakers
should adhere to the following:
• Avoid operating power tools alone.
• Don’t use a power tool with the power switch locked on.
• If powered via a power cord be certain that the tool is properly grounded. A ground
fault interrupt (GFCI) system is also a good precaution. This inexpensive device is
a good safety measure because it prevents a sustained electrical shock.
• Properly maintain and inspect all tools before use to avoid electrical shock.
Keep the Solar Panel free of dirt, dust and grime. Dust covering the Solar
Panel will block out sunlight causing a decrease or stoppage of efficiency in
recharging the battery.
WARNING: NiCad batteries must be disposed of properly. Do not incinerate.
The battery may burst, causing personal injury and/or property damage. Contact
your local hazardous waste disposal authority for proper disposal.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.