Harbor Freight Tools 90953 Air Cleaner User Manual


 
6. Replacement parts and accessories. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use
accessories intended for use with this product.
7. Avoid electrical accidents. This Cleaner is intended for indoor areas only and
is not to be used in damp areas. Never use this product in a bathroom or any
other area where accidents involving water and electric shocks could occur.
Check with your Physician before using this Air Cleaner in a nursery.
Unpacking
When unpacking, check to make sure the following parts (shown on page 5)
are included. If any parts are missing or broken, please call Harbor Freight Tools at
the number on the cover of this manual.
Operation
The HEPA filter silently removes dust, smoke, pollen, and odors from pets or cooking.
The Control Panel (7) has a Speed Control and a Programmable Timer.
The Programmable Timer allows operating time from
1
/
2
hour to 7-
1
/
2
hours.
Operating Instructions
1. Locate the Air Cleaner on a flat, solid surface such as a table or floor. Plug the
Air Filter into an electrical outlet. Press the ON switch on the Control Panel (7).
The Power Light on the Control Panel will come on indicating that the Air Filter is
operating.
(See Figure 1).
2. To set the timer: press the “Timer Control” button until the desired Timing Light
(or combination of lights) lights up on the Control Panel (7). You can set the
Speed Control to High or Low by pressing the Speed Control button once or
twice until the desired speed is indicated by the light. (
See Figure 1).
®
ITEM 90953
4 Hours
2 Hours
1
/
2
Hour
1 Hour
High
Speed
Low
Speed
Timer
Control
Speed
Control
Ionizer HEPA Air Cleaner
POWER
ON/OFF
SKU 90953 Page 3
ON/OFF Switch
Power Light
Timer Control
Speed
Control
High Speed
Low Speed
Timing Lights
Control Panel (7)
Figure 1