Filter
Top Products
Page 3SKU 47906 For technical questions, please call 1-800-444-3353.
9. Disconnect power. Unplug Pump when not in use.
10. Stay alert. Watch what you are doing, use common sense. Do not install Pump when
you are tired.
11. Check for damaged parts. Before using Pump, any part that appears damaged
should be carefully checked to determine that it will operate properly and perform its
intended function. Check for alignment and binding of moving parts; any broken parts
or mounting fixtures; and any other condition that may affect proper operation. Any part
that is damaged should be properly repaired or replaced by a qualified technician.
12. Guard against electric shock. Prevent body contact with grounded surfaces such as
pipes, radiators, ranges, and refrigerator enclosures.
13. Replacement parts and accessories. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use accessories
intended for use with this tool. Approved accessories are available from Harbor Freight
Tools.
14. Do not install Pump if under the influence of alcohol or drugs. Read warning
labels on prescriptions to determine if your judgment or reflexes are impaired while
taking drugs. If there is any doubt, do not install the Pump.
15. Use proper size and type extension cord. If an extension cord is required, it must be
of the proper size and type to supply the correct current to the tool without heating up.
Otherwise, the extension cord could melt and catch fire, or cause electrical damage to
the tool. This tool requires use of an extension cord of 0 to 10 amps capability (up to
50 feet), with wire size rated at 18 AWG. Longer extension cords require larger size
wire. If you are using the tool outdoors, use an extension cord rated for outdoor use
(signified by “WA” on the jacket).
16. Maintenance. For your safety, maintenance should be performed regularly by a
qualified technician.
Warning: People with pacemakers should consult with their physician(s) before
using this product; operation of equipment in close proximity to a heart pacemaker
could cause interference or failure of the pacemaker.
Warning! Never operate this pump if the power cord or electrical components are
damaged or the seals are compromised. Never plug in the power cord when wet or
standing on damp or wet ground. Exercise extreme caution when working with electrical
equipment in the presence of water to maintain your personal insulation to avoid shock.
Do not allow others in the work area when working with electrical equipment. Use GFCI
outlets when using this pump.
Note: Performance of this tool (if powered by line voltage) may vary depending on variations
in local line voltage. Extension cord usage may also affect tool performance.
Warning: The warnings, cautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be understood
by the operator that common sense and caution are factors which cannot be built into
this product, but must be supplied by the operator.