Filter
Top Products
SKU 08825 For technical questions, please call 1-800-444-3353. PAGE 3
PROPER VOLTAGE WARNINGS
Common household current is 110-120 volts. As long as the outlet used with the tool
is rated from 110-120V there will be no complications using it with household receptacles.
Plug the tools with Power Adapter into a 110-120V properly grounded outlet protected by a
15-amp, dual element time delay fuse or circuit breaker.
NEVER try to plug a 110-120V tool into a 220-240V circuit or serious complications
and possible injury to the operator may occur. The plugs have different shapes to prevent
this.
9. AVOID TOUCHING THE LENS as it may become hot during operation.
10. DO NOT DISASSEMBLE THE BATTERY or remove any parts from the Battery
and surrounding connections.
11. DO NOT ALLOW THE SPOTLIGHT TO BE EXPOSED TO FIRE OR HIGH HEAT
as this may result in an explosion.
12. DISCONNECT POWER. Unplug charger when not in use.
13. MAINTENANCE. For your safety, maintenance should be performed regularly by a
qualified technician.
14. SPOTLIGHT IS NOT COMPLETELY WATERPROOF.
Warning: The warnings, cautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be
understood by the operator that common sense and caution are factors which
cannot be built into this product, but must be supplied by the operator.
Warning: Operation of equipment in close proximity to a heart pacemaker could cause
interference or failure of the pacemaker.
Warning: This product contains or, when used, produces a chemical known to the State
of California to cause cancer and birth defects or other reproductive harm.
(California Health & Safety Code § 25249.5, et seq.)
Note: Performance of this tool (if powered by line voltage) may vary depending on varia-
tions in local line voltage. Extension cord usage may also affect tool performance.
UNPACKING
When unpacking your Spotlight, check to make sure the following parts are included. If
any parts are missing or broken, please call Harbor Freight Tools at 1-800-444-3353.