Harbor Freight Tools 36711 Fan User Manual


 
Page 3SKU 36711 For technical questions, please call 1-800-444-3353
9. Check for damaged parts. Before using any product, any part that appears
damaged should be carefully checked to determine that it will operate properly and
perform its intended function. Check for alignment and binding of moving parts; any
broken parts or mounting fixtures; and any other condition that may affect proper
operation. Any part that is damaged should be properly repaired or replaced by a
qualified technician. Do not use the Heater if any switch does not turn On and Off
properly.
10. Replacement parts and accessories. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use accessories
intended for use with this tool. Approved accessories are available from Harbor
Freight Tools. The fuse in this unit must only be replaced with another 10 Amp
Fast Acting (F10A250V) Fuse of the same type.
11. Do not operate product if under the influence of alcohol or drugs. Read warning
labels if taking prescription medicine to determine if your judgment or reflexes are
impaired while taking drugs. If there is any doubt, do not operate the Heater.
12. Maintenance. For your safety, service and maintenance should be performed
regularly by a qualified technician.
Specific Safety Warnings
1. Risk of fire! Never obstruct the inlet or outlet of the Heater. Verify that all
openings are clear during setup. NEVER leave this unit unattended while plugged in.
2. Risk of Burns! Keep children and pets away from this unit while it is hot. Do not
place hands or feet near the vent.
3. Do not deplete the vehicle battery. Only use this Heater when the vehicle’s engine
is running.
4. Not For Extended Use. Only use this Heater for 15 to 20 minutes at a time.
5. Place the Heater in the proper location. Set up the Heater in a level location that
allows at least 2 inches of air space on every side of the unit. Make sure nothing
comes in contact with the Heater. Do not operate in close proximity to liquid.
6. Make sure the vehicle lighter socket has a minimum capacity of 12 amps. Do
not use a socket extension or pigtail to operate this heater.