Filter
Top Products
10
2x
2x
2x
1x
Fitting Items / Water Connections Overview Corner Installation
Seal all drill holes with silicone free from acetic acid (not in scope of delivery)
Fitting items / water connections corner installation
Before drilling the bottom holes pay attention if hot and/or cold
water supply pipes cross this area. In this case, only drill on the
side without any supply pipes.
Dimensions
The installation dimensions stated in this installation instructions are ideal
for people of approximately 70" in body height. The dimensions can be
altered if required. In this case you will have to attend to the minimum height
of 87" from shower tray floor, and alter all the required measurements
as necessary.
If the height of water connection are outside of the illustrated range, the
drill measures have been adjusted accordingly.
(attention for minimum room height of 87 from tub-floor)
Flush through the supply pipes.
SW
5 mm
Ø6 mm
SW10 mm
Ø6 mm
SW
6 mm