Filter
Top Products
2
Uno
2
Sink Mixer
38830XX1
Technical Specification
Flow rate 2.2 gpm
Max. incoming water pressure 145 psi
Recommended incoming water pressure 14.5 - 72 psi
Max. incoming hot water temp 176
o
F*
Recommended incoming hot water temp 120
o
F - 140
o
F*
Hole size in mounting surface 1 1/4”
Maximum mounting surface thickness 2 3/8”
Maximum mounting surface thickness with extension 2 7/8”
*know and follow all applicable local plumbing codes when setting the temperature on the water heater.
Installation Considerations
Be sure that you have all tools and supplies necessary before beginning the installation.
The supply hoses on this faucet require supply stops with 3/8” compression fittings (not included).
Confirm that there is sufficient space to the rear of the faucet for the movement of the handle.
Installer - please leave this booklet for the homeowner as it contains important information about
the faucet.