Filter
Top Products
3
Installation Instructions
• Sit the faucet with black sealing ring in
the faucet hole on top of the mounting
surface.
• From beneath, install the friction washer,
metal washer, and mounting nut. Tighten
the mounting nut, taking care not to
overtighten.
• Check the position of the faucet. When
satisfied, use a slot-headed screwdriver to
tighten the tensioning screws.
• Feed the pull rod through the hole in the
back of the faucet body.
• Attach the supply lines to the supply stops
with standard 3/8" compression fittings
(not included). Push the compression nut
and ferrule over the hose shank. Push the
hose shank into the supply stop. Tighten
the compression nut wrench tight.
sealing ring
friction washer
metal
washer
mounting
nut
tensioning
screws
Replacement Parts
1 handle 38094XXX
1.1 screw cover 96762000
1.2 set screw 96029000
2 flange 96763XXX
3 nut 97209000
4 cartridge 96764000
5 seal 95008000
6 aerator 97370XXX
7 fixing set 13961000
8 pull rod 96657000
9 ball joint 96050XXX
10 aerator 94005XXX
1
2
3
4
5
6
7
8
9
10
1.1
1.2