Filter
Top Products
13
Set the high temperature limit stop (optional)
Loosen the handle screw us-
ing a 3mm Allen wrench.
Remove the handle. Remove the clip and the stop
ring from the stem.
Grasp the cartridge stop unit
and turn it counter-clockwise
to turn on the handshower.
Turn the stem until the output water is the desired maximum
high temperature (usually about 110°F*).
Turn the stop unit clockwise
to turn the water off.
Install the stop ring so that the
tooth is against the stop on the
top of the cartridge. Replace
the clip.
Install the handle. Tighten
the screw.
*In Massachusetts, the maximum output temperature cannot exceed 112°F.
English