Filter
Top Products
2
Talis
Single Control Kitchen Faucet
06462XXX
Product Specifications:
Hole size in mounting surface Minimum 1-1/2”
Maximum mounting surface depth 2-3/8”
Flow rate 2.2 GPM
Maximum incoming water pressure 145 PSI
Recommended incoming water pressure 22 - 72.5 PSI
Recommended incoming hot water temp 120
o
- 140
o
F*
M3 cartridge with high temperature limit stop
*Some governing bodies require that the water heater be set to 120
o
F or less. Please know and follow all applicable local
codes when setting the temperature on the water heater.
Installation Considerations
This faucet requires supply stops with 3/8” compression fittings (not included)
Make sure that the faucet is complete and in good condition and that you have all
necessary tools and supplies before beginning installation.
Protection against back siphonage is provided by a check valve in the sprayhead.
Installer: Please leave this manual with the customer as it contains valuable
information on the faucet.