Hamilton Beach HB-405 Vacuum Cleaner User Manual


  Open as PDF
of 12
 
6
b. Other maintenance tips and best practices
• Theltershouldbecleanedatleasttwiceamonthorwhenthelterbecomes
visibly solid due to dirt deposits.
• Alwaysoperatethereplacevacuumwiththelterinstalledotherwiseyoumay
experience reduced suction and the motor may be damaged.
• Alwaysdisconnectthecordfromtheelectricaloutletbeforecleaningtheash
container or filter.
• Whencleaningthelter,neverplacethelterintoawashingmachine.Thismay
damage the filter.
• Storethevacuuminacool,dryareawhennotinuse.
• Cordshouldbewoundbyhandandsecuredwithastringorrope.Donotstore
cord in can or wrap around vacuum.
• Useanauthorizedservicedealerforallrepairs.
• Thisapplianceisintendedforhouseholduseonly.
WARNING! To reduce the risk of electric shock, this vacuum cleaner has a polarized plug (one
blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If the plug still does not fit, please contact a
qualified electrician to install the proper outlet. Do not change the plug in any way.
6. TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
The vacuum cleaner won’t run. It is not properly plugged into the
wall outlet.
Plug in firmly.
There is no electricity in the wall
outlet.
Check the home fuse or breaker.
The on/off switch is not turned on. Push on/off switch to on.
Blown fuse/tripped breaker in
home electrical box.
Reset the electrical box circuit
breaker or replace fuse.
The vacuum cleaner won’t pick up. The ash container is full or
clogged.
Clean the ash container.
The dirt inlet is clogged. Remove aluminum suction tube
and remove obstruction.
Clogged flexible hose. Remove obstructions.
Dirty filters or filter container. Clean/change the filter.
The hose not inserted fully. Push the hose in securely.
 previous next