Filter
Top Products
5
c. When finished cleaning, switch vacuum to off position and unplug the unit from
the wall outlet.
d. To empty the container, pull the flexible hose out of the hose connector. Properly
dispose of the ash and dirt from the vacuum container in a trash can.
5. GENERAL MAINTENANCE
WARNING! Shock Hazard: Always switch off and unplug the vacuum cleaner from the
electrical outlet before assembling, opening or emptying the dirt container, or before
connecting/disconnecting the attachments.
a. Filter maintenance
1. Remove the lid from the vacuum and unscrew the filter wing nut on the top
of the filter housing (Fig. 5.7).
2. Remove the wing nut and take the filter lid off (Fig. 5.8). Remove the
filter (Fig 5.9).
3. Take filter off for cleaning. Remove excess dirt by tapping on the side of trash can.
Do not wash the filter in water as this may damage the filter.
4. Return the filter onto the vacuum lid (Fig 5.10).
5. Replace filter lid (Fig 5.11). Put the wing nut back on to secure the filter (Fig 5.12).
6. Place the lid on the vacuum can and secure the latch in locking mode (Fig 5.13).
G
3)MAINTENANCE AFTER USE .--- SCREW OFF THE FILTER SCREW IN
THE END AND TAKE THE FILTER OUT FOR CLEANING OR CHANGE
Follow below process from 1 to 3 for taking off the filter
Follow below process from 4 to 7 for assembling back and keeping the filter
CLEANING FILTER
FILTER SHOULD BE CLEANED AT LEAST TWICE A MONTH OR
WHEN IT BECOMES
VISIBLE SOLID.
ALWAYS OPERATE THE CLEANER WITH FILTER INSTALLED.
OTHERWISE, REDUCED SUCTION OR MOTOR DAMAGE MAY BE
RESULT.
DISCONNECT FROM ELECTRICAL OUTLET, BEFORE CLEANING
FILTER.
DO NOT USE A WASHING MACHINE TO RINSE FILTER.
DO NOT USE HAIR DRIER TO DRY IT.
-4-
G
3)MAINTENANCE AFTER USE .--- SCREW OFF THE FILTER SCREW IN
THE END AND TAKE THE FILTER OUT FOR CLEANING OR CHANGE
Follow below process from 1 to 3 for taking off the filter
Follow below process from 4 to 7 for assembling back and keeping the filter
CLEANING FILTER
FILTER SHOULD BE CLEANED AT LEAST TWICE A MONTH OR
WHEN IT BECOMES
VISIBLE SOLID.
ALWAYS OPERATE THE CLEANER WITH FILTER INSTALLED.
OTHERWISE, REDUCED SUCTION OR MOTOR DAMAGE MAY BE
RESULT.
DISCONNECT FROM ELECTRICAL OUTLET, BEFORE CLEANING
FILTER.
DO NOT USE A WASHING MACHINE TO RINSE FILTER.
DO NOT USE HAIR DRIER TO DRY IT.
-4-
G
3)MAINTENANCE AFTER USE .--- SCREW OFF THE FILTER SCREW IN
THE END AND TAKE THE FILTER OUT FOR CLEANING OR CHANGE
Follow below process from 1 to 3 for taking off the filter
Follow below process from 4 to 7 for assembling back and keeping the filter
CLEANING FILTER
FILTER SHOULD BE CLEANED AT LEAST TWICE A MONTH OR
WHEN IT BECOMES
VISIBLE SOLID.
ALWAYS OPERATE THE CLEANER WITH FILTER INSTALLED.
OTHERWISE, REDUCED SUCTION OR MOTOR DAMAGE MAY BE
RESULT.
DISCONNECT FROM ELECTRICAL OUTLET, BEFORE CLEANING
FILTER.
DO NOT USE A WASHING MACHINE TO RINSE FILTER.
DO NOT USE HAIR DRIER TO DRY IT.
-4-
G
3)MAINTENANCE AFTER USE .--- SCREW OFF THE FILTER SCREW IN
THE END AND TAKE THE FILTER OUT FOR CLEANING OR CHANGE
Follow below process from 1 to 3 for taking off the filter
Follow below process from 4 to 7 for assembling back and keeping the filter
CLEANING FILTER
FILTER SHOULD BE CLEANED AT LEAST TWICE A MONTH OR
WHEN IT BECOMES
VISIBLE SOLID.
ALWAYS OPERATE THE CLEANER WITH FILTER INSTALLED.
OTHERWISE, REDUCED SUCTION OR MOTOR DAMAGE MAY BE
RESULT.
DISCONNECT FROM ELECTRICAL OUTLET, BEFORE CLEANING
FILTER.
DO NOT USE A WASHING MACHINE TO RINSE FILTER.
DO NOT USE HAIR DRIER TO DRY IT.
-4-
Fig 5.7
Fig 5.10 Fig 5.11 Fig 5.12 Fig 5.13
Fig 5.8 Fig 5.9