Filter
Top Products
7
To Replace the Filter
NOTE: A filter should last 1 to 4 months, depending on use.
1. Turn off and unplug the odor eliminator. Open cover of
odor eliminator and remove the used filter.
2. Discard used filter. Remove plastic bag from new filter
before installing. Use only Hamilton Beach TrueAir
™
filters.
3. Press the reset button. The Filter Status/Power Indicator
Light will continue to blink red until it has been reset.
Customer Service
If you have a question about your odor eliminator, call our
toll-free customer service number. Before calling, please
note the model, type, and series numbers and fill in that
information below. These numbers can be found on the
back of your odor eliminator. This information will help us
answer your question much more quickly.
MODEL:_____________ TYPE:_____________ SERIES: ______________
6
Cleaning
1. Turn off and unplug the odor eliminator before cleaning.
2. Wipe the exterior housing with a clean, dry cloth only.
3. To clean the grill, wipe with a damp cloth or use a vacuum
cleaner to remove lint or debris.
4. Do not use detergents, solvents, or spray cleaners.
Do not immerse unit in water or other liquid.
To rotate the swivel plug:
• Loosen screw with Philips
screwdriver until screw pops out
allowing the plug assembly to
rotate.
• Rotate plug 90º to desired tab
position and retighten screw.
NOTE: Outlets in older homes
may not hold the odor eliminator
securely. If the odor eliminator seems “loose” within the
outlet, please contact a qualified electrician to replace the
obsolete outlet.
5. Turn ON; the green light will indicate that the unit is on.
NOTE: You may leave the odor eliminator on constantly or
only use occasionally for strong odors. The odor eliminator
is designed to work best when plugged in within six feet of
the odor source.