5
How to Use
NOTE: QuickClean provides a faster
fan speed to quickly eliminate odors.
WhisperClean provides a fan speed
needed to continuously eliminate
odors.
1. Open the cover of odor eliminator
as illustrated.
2. Remove plastic bag from the
filter before installing the filter.
Place the filter in the odor elim-
inator, fitting notched corner of
filter around notched edge of
odor eliminator.
3. Close the cover of the odor
eliminator until it snaps into place.
NOTE: The life of the filter is
determined by use. If the odor
eliminator is used continuously for
strong odors, such as a cat litter
box or diaper pail, it may need to
be replaced at 1 month. If only
used occasionally, such as in a
guest bathroom, it may last
longer.
4. Plug in odor eliminator as
illustrated.
Notched
Corner
4
Whisper
Clean
Quick
Clean
Parts and Features
1. Opening Tabs
2. Vents
3. Housing
4. Filter Status/
Power Indicator Light
5. Reset Button
6. Control Switch
7. Filter
8. Grill
Reset Button
• The Filter Status/Power Indicator Light will glow when the
unit is turned on. The green light will turn red when 14 days
of the 120-day filter life remain to remind you to purchase a
replacement filter. At the end of 120 filter-life days, the light
will flash on and off. Replace filter and insert tip of pen into
reset button to reset the 120-day filter counter. The green
light will blink twice to indicate unit has been reset.
• The unit will remember the amount of usage prior to a
power outage and begin counting days again when power
is restored. The unit does not need to be turned on to count
filter days.