Filter
Top Products
5
Using the Allergen Reducer
Before First Use: Be sure to remove all packing materials. The filter is packed in a
plastic bag inside the Allergen Reducer for shipping.
1. For model 04381: To remove the
front grille,
press on the
grille release
buttons on
each side of
the grille and
pull towards
you.
For model 04371: To remove the
front grille,
grasp each
side of the
grille and pull
towards you.
2. Remove the plastic bag from the
filter then replace the filter in the unit.
3. To close the front grille of the Allergen
Reducer, position the grille on the
front of the unit and push until it
snaps into place.
4. Ensure the Allergen Reducer is in the
OFF position.
5. Plug in the Allergen Reducer.
6. Select desired fan speed.
NOTES:
• The life of the filter is determined by
use. If the Allergen Reducer is used
continuously, it may need to be
replaced after 1 month. If only used
occasionally, it may last up to 4 months.
• Filter life will depend on use and
allergy season.
Replacing the Filter
1. Turn off and unplug Allergen
Reducer. Remove the front grille
then remove the used filter by grip-
ping the sides and pulling outward.
Discard the used filter. It cannot be
cleaned.
2. Obtain a replacement filter. Insert the
unwrapped filter.
NOTE: Improper filter installation will
result in poor air filtration.
Purifier Room Size
Model (sq. ft.) Filter
04371 110 ft
2
04711
04381 210 ft
2
04712
The Allergen Reducer is designed to
filter the room three times per hour at
high speed. Factors such as room
shape and ceiling height can affect
this rate. It is normal that the air flow
will be reduced as the filter becomes
clogged. Replace the filter as needed.
To order replacement filters, call
Customer Service:
U.S. at 1-800-851-8900
Canada at 1-800-267-2826
To Order Replacement Filters
840117900 ENv00 8/27/03 11:28 AM Page 5