Filter
Top Products
4
How to Use
The odor eliminator is designed for easy use and maintenance. Make sure to remove all packing
materials and properly install the filters before use. Remember to remove the plastic bags from filters
and scent cartridge, and activate filter replacement indicator before using.
1
3
Unlock tabs.
Pull out filters and remove from
plastic bags.
2
Remove base.
4
Press firmly on foil bubble to activate
Filter Replacement Indicator. A red
line should appear shortly after press-
ing the foil bubble, which indicates
it has been activated correctly.
5
6
Replace filters in unit. Align notch
in filter with top-left corner of vent.
Remove Scent Cartridge from plastic
wrapping and place into slot in base
of unit. NOTE: Scent Cartridges are
optional accessories on select models.
7
Replace base and lock tabs.
OFF
LO
HI
8
Plug in unit. Turn Control Knob to
desired setting.
Bottom of unit
840174401 ENv03.qxd:Layout 1 11/5/09 3:42 PM Page 4