Filter
Top Products
Parts supplied
Check that all parts are included in parts package.
NOTE: Installation parts are supplied for double-hung windows
up to 40" (101.6 cm) wide.
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools Needed
Through-the-Wall Installation:
In addition to the tools listed above, the following tools are
needed for through-the-wall installation.
■ Phillips screwdriver
■ Level
■ ¹⁄₄" wrench
■ Tape measure
■ Cordless drill and ¹⁄₈" or
smaller bit
■ Pencil
■ Scissors
■ Saw
■ Wood preservative
■ Caulk
■ 1" (2.5 cm) or thicker
lumber
■ 1" wood screws (7)
G.3/4"Screws (10)
E.1/4" Nuts (2)
F.1/4"Screws (23)
O.Side Curtain Clamp (2)
I.Lock Washers (2)
J.Washer (14)
Q.Angle Brackets (2)
H.Lock Washers (4)
K.Washer(2)
D.1/5” Nuts (4)
A.Foam Seal (1)
B.
Side curtains RH (1)
Side curtains LH (1)
C.1/2"x1/5” Bolts (4)
Q R
L.Adhesive Seal (1)
M.Top Channel (1)
N.Top Channel Seal (1)
P.Bottom Channel (1)
R.Left and Right Suppert
Brackets (2)
3
(It is only used for CWH12A)