Filter
Top Products
Safety Cautions
Warning !
Have the unit professionally installed.
Improper installation by an unqualified person
may result in water leak, electric shock, or fire.
Be sure to carefully follow each step in this
handbook when installing the unit.
Improper installation may result in water leak,
electric shock, smoke or fire.
Have all electrical work performed by a
licensed electrician according to the local
regulations and the instructions given in
this manual. Secure a circuit designated
exclusively to the unit.
Place the unit on a stable, level surface that
withstands the weight of the unit to prevent
the unit from tipping over or falling causing
injury as a result.
Only use specified cables for wiring.Securely
connect each cable, and make sure that the
cables are not straining the terminals.
Cables not connected securely and properly may
generate heat and cause fire.
Take necessary safety measures against
typhoons and earthquakes to prevent the
unit from falling over.
Do not make any changes or modifications
to the unit. In case of problems, consult the
dealer.
If repairs are not made properly, the unit may
leak water and present a risk of electric shock, or
it may produce smoke or cause fire.
Improper installation or a lack of circuit capacity
may cause the unit to malfunction or present a
risk of electric shock, smoke,and fire.
Securely attach the terminal cover(panel)
on the unit.
If installed improperly, dust and/or water may
enter the unit and present a risk of electric shock,
smoke, or fire.
Only use refrigerant R410A as indicated
on the unit when installing or relocating
the unit.
The use of any other refrigerant or an
introduction of air into the unit circuit may
cause the unit to run an abnormal cycle and
abnormal cycle and cause the unit to burst.
4