Filter
Top Products
25
PRECAUTION
Self-contained accessories
3. Accessories for installation
Name of
Parts
No. A B
C D E F
Non-adhesive
Tape
Adhesive
tape
Connecting
Hose
Gypsum
powder
Drain hose
Heat
insulation
material
2. Preparation for installation
Installation tools
7 Pipe Cutter
14 Refrigeration Oil
6 Spanner
13 Scraper or File
5 Shifting Spanner
12 Measuring Tape
4 Inner Hexagon Spanner
11 Leakage Checker or Soap Liquid
3 60mm Drill
10 Clippers
2 Steel Saw
9 Knives
1 Screw Driver (flat head, wabbler, triangle)
8 Pipe Expander
4. Choose the installation place
Install the indoor unit where the weight of the unit can be supported.
Install the indoor unit where the heat source and steam source are not close and the unit inlet and
outlet are not blocked.
Install the indoor unit where the drainage is easy and the outdoor unit can be easily connected.
Install the indoor unit where its cold air and hot air can be easily sent to all the comers of the room.
Install the indoor unit where the power socket is near and there is sufficient space around the indoor unit.
Install the indoor unit where there is no T.V set, radio set, and wireless applian ce underneath, and the
sunlight lamp is over one meter away.
If the remote controller is installed on the wall, the indoor unit shall be ensured to receive the signal
while the sunlight lamp is on.
An electric leakage breaker must be installed, otherwise electric shock or other accidents would occur.
After completion of the installation, the air conditioner shall be electrified to check for electric leakage.
Execute proper grounding. Do not connect the earth wire to a gas pipe, water pipe, lightening rod,
or a telephone ground wire. Improper placement of earth wires can result in electric shock.
Instructions to installation