Filter
Top Products
12
WARNING
Instructions to installation
1. Safety precautions
Please read these "Safety Precautions" first then accurately execute the installation work.
Though the precautionary points indicated herein are divided under two headings,
and , those points which are related to the strong possibility of an installation done
in error resulting in death or serious injury are listed in the section. However,
there is also a possibility of serious consequences in relationship to the points listed in the
section as well.
In either case, important safety related information is indicated, so by all means, properly observe
all that is mentioned.
After completing the installation, along with confirming that no abnormalities were seen from the
operation tests, please explain operating methods as well as maintenance methods to the user
(customer) of this equipment, based on the owner's manual.
Moreover, ask the customer to keep this sheet together with the owner's manual.
CAUTION
WARNING
WARNING
CAUTION
This system should be applied to places as office, restaurant, residence and the like. Application
to inferior environment such as engineering shop could cause equipment malfunction.
Please entrust installation to either the company which sold you the equipment or to a professional
contractor. Defects from improper installations can be the cause of water leakage, electric
shocks and fires.
Execute the installation accurately, based on following the installation manual. Again, improper
installations can result in water leakage, electric shocks and fires.
When a large air-conditioning system is installed to a small room, it is necessary to have a
prior planned countermeasure for the rare case of a refrigerant leakage, to prevent the exceeding
of threshold concentration. In regards to preparing this countermeasure, consult with the
company from which you perchased the equipment, and make the installation accordingly. In
the rare event that a refrigerant leakage and exceeding of threshold concentration does occur,
there is the danger of a resultant oxygen deficiency accident.
For installation, confirm that the installation site can sufficiently support heavy weight. When
strength is insufficient, injury can result from a falling of the unit.
Execute the prescribed installation construction to prepare for earthquakes and the strong
winds of typhoons and hurricanes, etc. Improper installations can result in accidents due to a
violent falling over of the unit.
For electrical work, please see that a licensed electrician executes the work while following
the safety standards related to electrical equipment, and local regulations as well as the
installation instructions, and that only exclusive use circuits are used.
Insufficient power source circuit capacity and defective installation execution can be the cause
of electric shocks and fires.
Accurately connect wiring using the proper cable, and insure that the external force of the
cable is not conducted to the terminal connection part, through properly securing it. Improper
connection or securing can result in heat generation or fire.
Take care that wiring does not rise upward, and accurately install the lid/service panel.