Filter
Top Products
Installation procedure
Install indoor unit
1.Choose installation place
The chosen installation place should meet the following requirements and
get the userís consent.
Place air can freely circulate.
Place can perform level installation.
The condensate water can be drained smoothly.
Place where the noise and hot air will not
disturb the neighbors.
Place can ensure the space for successful
maintenance and repair.
Place where the four corners of the unit are easily installed and leaves
at least 1m height space.
Place where the wall hole is easy for drainage.
When installing multiple units, make sure to leave enough space to
avoid air short-circuit.
If the outdoor unit near the street, it should not be lower than 2.5m.
Please install in the place that can sufficiently bear the weight of the
unit. The air conditioner cannot install on a non-special metal frame
(e.g. theft guard net).
Install in the place with intensity as high as possible to prevent the
noise and vibration from spreading to other places.
Avoid the place where the strong airflow directly toward the air inlet
or air outlet.
Avoid the place where high frequency electromagnetic waves are
generated to prevent the communication of indoor and outdoor from
being affected.
Avoid the place where the combustible gas exists. The combustible
gas around the air conditioner may cause fire.
Avoid the place where the combustible gas may be leaked. If the leaked
gas gathers around the air conditioner, it may cause fire accident.
Avoid the place with to much oil, vapor and salinity, such as, seashore
and hotspring area and the area with sulfurated gas, etc. corrosive gas.
If install in these places, the air conditioner needs special maintenance.
Avoid the place where the heat source directly radiates or with other
heat sources.
>10cm
>15cm
>60cm
>10cm
>30cm
3