Filter
Top Products
P ERFORMANCE SPECIFICATIONS
– vi –
Power Rating 200 W RMS @ 4 ohms
Signal-to-Noise >100dB
CMRR >70dB typical @ 60Hz
Input Impedance 47kΩ per phase balanced, 47kΩ unbalanced
Input Sensitivity Range 160mV to 5V (unbalanced)
80mV to 2.5V (per phase balanced)
Gain +45dB max. to +15dB min.
Power Consumption Idle Power: 11W / 150mA @ 120 VAC
Idle Power: 11W / 90mA @ 230 VAC
Normal Operation: 68W / 770mA @ 120 VAC
Normal Operation: 66W / 380mA @ 230VAC
Full Power: 330W / 3.3A @ 120VAC
Full Power: 315W / 1.7mA @ 230VAC
Rear Panel Balanced XLR Inputs
Unbalanced RCA Inputs
Gain Control (30dB range)
Low Pass Crossover (variable 40Hz~140Hz)
Phase DIP Switches (0°, -90°, -180°, -270°)
Crossover Frequency Variable from 40Hz~140Hz
Crossover Slope 24dB/octave (4th order) Linkwitz-Riley
Subsonic Filter 12dB/octave (-3dB @ 18Hz)
Specifications are subject to change without notice.
A
MPLIFIER
S
ECTION
TRM10
S
Free Field Frequency Response 27Hz-110Hz, ±2dB 25Hz-110Hz, ±2dB
Peak Acoustic Output ≥112dB (w/music @ 2m) ≥115dB (w/music @ 2m)
Total Harmonic Distortion (THD) <3%, 30Hz-90Hz (90dB @ 2m) <3%, 25Hz-90Hz (90dB @ 2m)
Low Frequency Driver 10" (254mm) Cellulose Fibre Cone 12" (305mm) Cellulose Fibre Cone
Santoprene Rubber Surround Santoprene Rubber Surround
2" (51mm) 4-Layer Voice Coil 2.5" (63.5mm) 4-Layer Voice Coil
30 oz. Magnet 102 oz. Magnet
Cabinet 1.0ft
3
(28 Liter) Vented Down Firing 2.0ft
3
(56 Liter) Vented Down Firing
Dimensions 14.75"(H) x 16"(W) x 16"(D) 18.25"(H) x 19.50"(W) x 19.375"(D)
(37.46cm x 40.64cm x 40.64cm) (46.35cm x 49.53cm x 49.21cm)
Net Weight 53 lbs. (24kg) 94 lbs. (42kg)
TRM12
S
L
OW
-P
ASS
C
ROSSOVER
S
ECTION
S
UBWOOFER
M
ODEL
*Frequency response generated with 60Hz low pass crossover engaged
Frequency Response @ 2m*
Frequency Response @ 2m*
W
H = 14.75"
D = 16"
16"
TRM10s Dimensions
H = 18.25"
W
D = 19.375"
TRM12s Dimensions
19.50"