Haan SI-75 Carpet Cleaner User Manual


 
12
White spot left on floor.
Unit does not emit steam.
Water left on floor.
Unit not operating.
• When cleaning do not leave unit in one spot for too long.
• Use protector pad / oor mat when unit is ON and stationary.
• Use distilled water instead of hard tap water.
NOTE: To remove spot, use a damp cloth with a few drops of white vinegar
to rub and remove stain.
• Ensure water tank is lled with water.
• Change the Ultra-microber pad.
• Ensure unit is always level and parallel to the oor.
• Ensure plug is set rmly in outlet.
• Replace fuse or reset breaker.
Troubleshooting
Problem Solution
12
Using the Long Extension Hose
Adds maneuverability when cleaning hard to reach areas. Works with the Small Steam
Head Attachment, Angled Nozzle Attachment and Brush Attachment.
*Works with the Small Steam Head Attachment, Angled Nozzle Attachment and Brush Attachment.
OPEN CLOSE
CLOSECLOSE
OPEN CLOSE
CLOSECLOSE
OPEN CLOSE
CLOSECLOSE
“Locked”
Position