Filter
Top Products
Using the Handheld Steamer - Operating Instructions
Using the Carpet Glide - FOR FRESH STAINS
1
4
Place unit on stain. Let stand for
a few seconds. Allow steam to
saturate stain.
Gently place unit on Ultra-micro-
fiber pad.
2
5
Slowly move unit back and forth
over stain.
Use the pad to rub the area
“blotting” out the stain.
“Hands Free”
Removal Tab
3
6
Remove carpet glide from
unit with hands free tab.
Turn unit OFF. When cooled,
remove Ultra-microfiber pad.
1
Before detaching Handheld
Sanitizer, make sure the unit is
turned OFF.
PUSH
2
Press Handheld release
buttons inward to release
Handheld unit.
3
Remove Handheld unit from
floor unit. DO NOT pull power
cord when removing
10
Steam Level Button
The Steam Level Button is located on the handheld unit above the Steam Power Switch. When
cleaning floors the steam level button will automatically be set to release an optimal amount of
steam that will leave floors clean and dry. When the handheld unit is disengaged from the floor
unit the Steam Level Button will automatically switch to a higher steam output setting that is the
ideal power for handheld use.