Haan HS-20 Carpet Cleaner User Manual


 
18. To refill the product with water during use, follow
the directions on pg 8. Unplug the product before
attempting to add water.
19. The product and accessories become hot during use.
Exercise care when changing accessories and follow
removal/changing instructions as outlined in manual.
20. Use only manufacturer’s recommended attachments
— use of attachments not provided, approved or sold
by HAAN may cause fire, electric shock or injury and
will void warranty.
21. If the circuit breaker activates while using the steam
function discontinue product use immediately and
contact the customer support center (Beware of the
risk of electrical shock.) To avoid circuit overload, do
not operate another appliance on same circuit as the
steam cleaner.
22. DO NOT allow the product to be disassembled and/or
modified by anyone other than an authorized HAAN
service technician. Doing so can result in fire and/or
electrical shock and would void warranty.
23. To provide continued protection against risk of electric
shock, connect to properly grounded outlet only.
Grounding Instructions:
The HAAN HS-20 must be connected to a grounded (3-prong)wiring system. Grounding
provides a safe path of least resistance for electrical current, in the event the unit should
malfunction or break down, thereby reducing the risk of electrical shock. The cord for
this product has an equipment-grounding conductor and a grounding plug. Do not plug it
into an outlet that is not properly installed and grounded in accordance with all local
codes and ordinances.
Check with a qualified electrician or service person if you aren’t sure if the outlet is
properly grounded. If it will not fit the outlet, have a proper outlet installed by a
qualified electrician. This appliance is designed for use on a nominal 120-volt circuit
and has a grounding attachment plug as illustrated below. Make certain that the
appliance is connected to an outlet having the same configuration as the plug. This is
a safety feature — do not defeat attempt to defeat the safety purpose of this grounding
pin. No plug adapter should be used with this appliance.
If an extension cord is
absolutely necessary, an
extension cord rated a
minimum of 15 ampere
14 gauge cord should be
used. Cords rated for less
amperage may overheat.
Care should be taken to
arrange the cord so it cannot
be pulled or tripped over.
WARNING
DO NOT modify the plug.
Improper connection of
the equipment-grounding
conductor can result in a
risk of electrical shock.
www.haanusa.com 877-HAAN DIRECT / 877-422-6347 pg 3
Grounded
Outlet
Grounded
Pin
!
i
IMPORTANT
Use regular tap water, or if
the tap water in your area is
hard, we recommend you
use distilled/purified water.
Always empty water from
water tank after use.