Filter
Top Products
-12- G9956 Heavy-Duty Hanging Air FilterG9956 Heavy-Duty Hanging Air Filter -12-
Speeds and Timer
You can adjust the fan speed and the length of
time your double air filter runs by programing it
with the included remote controller. To toggle
between fan speed and timer control functions,
press the
ON/HR button.
To set the fan speed:
1. Press the ON/HR button once. The fan
should start to run.
—If one or more of the lower lights comes
on, press the
ON/HR again.
2. Increase the fan speed by pressing the
increase button designated by the right hand
pointer.
3. Decrease the fan speed by pressing the
decrease button designated by the left hand
pointer.
To set the fan timer:
1. Press the ON/HR button after setting the fan
speed.
—If some or all of the lights in the upper row
come on, press the
ON/HR button again.
2. Increase the amount of time the fan runs
before automatically shutting off by pressing
the increase button.
—Each time this button is pressed, the
amount of time increases by two hours,w
up to a maximum 8 hour cycle.
3. Decrease the amount of time the fan runs
before automatically shutting off by pressing
the decrease button.
NOTE—When the automatic shut off feature is
not going to be used, press the decrease button
until the light over “continue” is illuminated.
ON/HR OFF
CONTINUE
HOUR
2 4 6 8
SPEED
Figure 7. Lights indicate a fan speed of 3.
Increase
Decrease
Figure 8. Light indicates time set for 6 hours of
operation.
ON/HR OFF
CONTINUE
HOUR
2 4 6 8
SPEED
Increase
Decrease