Step 4
Locate the lower facing panel and the firebox shelf. Attach the lower facing panel by placing the
finished side to the front then line up the holes on each side and insert 1 wingnut and 1 lock washer
into each. Place the firebox shelf in behind, right up against the lower facing panel.
Step 5
Locate the upper facing panel that will be attached to the left
and right legs and will sit above the firebox. Position this panel
with the finished side facing the front of the mantel. Line up the
holes on each side and insert and tighten 1 wingnut and 1
lock washer on each side.
Step 6
Get your assistant and locate the top of your mantel. This top
is very heavy. It will take 2 people to lift and position it in
place. Ensure the top goes over the positioning guide located
on the header. The top must go over this guide to be
positioned correctly. Line up the holes on the top of the mantel,
insert and tighten 4 wing nuts and lock washers.
3