Filter
Top Products
Step 4
Locate the central panel and position it by resting the panel on the
front legs of the left and right front panels. Make sure the holes are
lined up, then insert and tighten 1 screw on each side.
Step 5
Locate the upper facing panel that will be attached to the left
and right legs and will sit above the firebox behind the central
panel. Position this panel with the finished oak side facing the front
of the mantel. Line up the holes on each side and insert and tighten
2 screws on each side.
Step 6
Get your assistant and locate the top of your mantel. This top is very heavy. It will take 2 people to lift
and position it in place. Ensure the top goes over the positioning guide located on the header. The top
must go over this guide to be positioned correctly.
3
INSIDE
VIEW
OUTSIDE
VIEW