Filter
Top Products
Operation
312769D 9
b. For T2 2:1 pump only: Interconnect tee fitting (2)
and quick disconnect fitting (1b) on pump with
air hose (5).
8. Remove one cap (C) from the air manifold (M) on
the sprayer and the connect air line from the agitator
or pump.
Flush Before Using Equipment
The equipment was tested with lightweight oil, which is
left in the fluid passages to protect parts. To avoid con-
taminating your fluid with oil, flush the equipment with a
compatible solvent before using the equipment. Refer to
the Flushing section in proportioner manual.
Operation
Refer to separate pump and agitator manuals for opera-
tion and maintenance instructions.
Troubleshooting/Repair
See supplied pump manual and agitator manual for
maintenance, troubleshooting, and repair procedures.
F
IG. 2: XM Sprayer
r_256275_312769_3A
256275 2:1 Pump Kit Shown
55
2
1b
5
5
Shown in 20 gallon hopper.
C
r_256275_312769_4A
FIG. 3: XP70 Sprayer
C