Filter
Top Products
Maximum working pressure
............................
950 psi
(66
bar)
Maximum incoming air pressure
.........................
95 psi (6.5 bar)
Minimum incoming air pressure
..........................
25 psi (1.7 bar)
Ratio
.........................................................
1O:l
Maximum recommended
pump speed
...............................................
100cpm
(0.5
am
11.9 literslminl)
Air
consumption approx. 3.8 scfm
(0.106 m3/min) at 0.3 gpm
(1.1 llterlmin) flow rate
(60
cpm),
70 psi (4.8 bar) air pressure,
500 psi (35 bar) fluid pressure
Air
inlet
...........................................
114 npsm(f) swivel
Fluid inlet
.................................................
3/8 npt(f)
Fluid outlet
................................................
3/8 npt(f)
Wetted parts
...........................
Stainless
Steel,
Chrome Plating,
Acetal, Ultra-High Molecular
Weight Polyethylene, Buna-N
_.
.
..
.....................................
s a registered trademark
of
the Co.
WARRANTY
Graco warrants all equipment manufactured by it and bearing its name to be free from defects in material and
workmanship
on
the date of sale by an authorized Graco distributor to the original purchaser for
use.
As
purchas-
er's
sole
remedy for breach of this warranty, Graco will, for a period of twelve months from the date of sale, repair
or
replace any part of the equipment proven defective. This warranty applies only when the equipment is installed,
operated and maintained in accordance with Graco's written recommendations.
This warranty does not cover, and Graco shall not be liable for, any malfunction, damage
or
wear caused by faulty
installation, misapplication, abrasion, corrosion, inadequate
or
improper maintenance, negligence, accident,
wear caused by the incompatibility with Graco equipment of structures, accessories, equipment
or
materials
not
tampering,
or
substitution
of
non-Graco component parts. Nor shall Graco be liable for malfunction, damage or
supplied by Graco, or the Improper design. manufacture, installation, operation
or
maintenance of structures,
accessories, equipment or materials not supplied by Graco.
This warranty is conditioned upon the prepaid return
of
the equipment claimed to be defective
to
an authorized
charge any defective parts. The equipment
will
be returned
to
the original purchaser transportation prepaid.
if
Graco distributor
for
verification of the claim.
If
the claimed defect
is
verified, Graco
will
repair
or
replace free of
inspection of the equipment does not disclose any defect in material
or
workmanship. repairs will be made at a
reasonable Charge, which charges may include the costs of parts, labor and transportation.
DISCLAIMERS AND LIMITATIONS
THE TERMS
OF
THIS WARRANTY CONSTITUTE PURCHASER'S SOLE AND EXCLUSIVE REMEDY AND ARE IN LIEU
OF
ANY OTHER
WARRANTIES (EXPRESS
OR
IMPLIED), INCLUDING WARRANTY OF MERCHANTABILITY
OR
WARRANTY OF FITNESS
FOR
A PAR-
TICULAR PURPOSE, AND
OF
ANY NON-CONTRACTUAL LIABILITIES, INCLUDING PRODUCT LIABILITIES, BASED ON NEGLI-
GENCE
OR
STRICT LIABILITY. EVERY
FORM
OF LIABILITY
FOR
DIRECT, SPECIAL
OR
CONSEQUENTIAL DAMAGES
OR
LOSS
IS
EXPRESSLY EXCLUDED AND DENIED. IN NO CASE SHALL GRACO'S LIABILITY EXCEED THE AMOUNT
OF
THE PURCHASE
PRICE. ANY ACTION
FOR BREACH
OF
WARRANTY MUST BE BROUGHT WITHIN TWO
(2)
YEARS OF THE DATE
OF
SALE.
EQUIPMENT NOT COVERED BY GRACO WARRANTY
GRACO MAKES NO WARRANTY, AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AN0 FITNESS
FOR
A PAR-
TICULAR PURPOSE, WITH RESPECT TO ACCESSORIES, EQUIPMENT, MATERIALS,
OR
COMPONENTS SOLD BUT NOT MANU-
FACTURED BY GRACO.
These items sold, but not manufactured by Graco (such as electric motor, switches, hose,
etc.) are subject to the warranty,
if
any, of their manufacturer. Graco will provide purchaser with reasonable
assistance in making any claim for breach of these warranties.
Subsidiary and Affiliate Companies: Canada; England; Switzerland; France: Germany; HOng KOflg; Japan
Factory Branches: Atlanta, Dallas, Detroit,
Los
AngeleS, West Caldwell (N.J.)
GRACO INC. P.O.
BOX
1441
MINNEAPOLIS, MN
55440-1444
PRINTED IN U.S.A. 307-917 12-88
PTFE
PTFE