Filter
Top Products
7
MANUAL OPERATION
Manual operation can be used temporarily in case you cannot fi nd the remote
control or its batteries are exhausted.
Open and lift the front panel up
until it remains fi xed with a clicking
sound.
Push the button until the AUTO
indicator is lit; the unit will work
in forced AUTO mode (the default
setting temperature is 24C).
Close the panel fi rmly to its original
position.
! CAUTION
Once you push the manual button,
the operation mode is shifted in
order as: AUTO, COOL, OFF.
Push the manual button until
the OPERATION indicator fl ashes
rapidly (fi ve times per second); the
unit now is operating in forced
COOL mode. This is used for testing
purposes only.
When the OPERATION indicator
goes off, the air conditioner is OFF.
To restore the remote control
operation, use the remote control
directly.
1.
2.
3.
•
•
•
•
Open and lift the front panel up until it remains fi xed with a clicking sound.
Push the AUTO button and the air conditioner will run in AUTO mode.
Close the panel fi rmly to its original position.
NOTE
The “COOL” mode on the control board is only provided for testing purposes.
1.
2.
3.