Filter
Top Products
15
4. DUST IS BLOWN OUT FROM THE INDOOR UNIT
This is a normal condition when the air conditioner has not been used for a
long time or during fi rst use of the unit.
5. A PECULIAR SMELL COMES OUT FROM THE INDOOR UNIT
This is caused by the indoor unit giving off smells permeated from building
material, furniture, or smoke.
6. THE AIR CONDITIONER TURNS TO FAN-ONLY MODE FROM COOL OR HEAT MODE
(FOR COOLING/HEATING MODELS ONLY)
When indoor temperature reaches the temperature setting on air conditioner,
the compressor will stop automatically, and the air conditioner turns to FAN-
only mode. The compressor will start again when the indoor temperature rises
on COOL mode or falls on HEAT mode to the set point (for cooling/heating
models only).
7. DRIPPING WATER
Dripping water may generate on the surface of the indoor unit when cooling
in a relatively high humidity (relative humidity higher than 80%). Adjust the
horizontal louver to the maximum air outlet position and select HIGH fan
speed.
8. HEATING MODE (FOR COOLING/HEATING MODELS ONLY)
The air conditioner draws in heat from the outdoor unit and releases it via
the indoor unit during HEAT operation. When the outdoor temperature falls,
heat drawn in by the air conditioner decreases accordingly. At the same time,
heat-loading of the air conditioner increases due to a larger difference between
indoor and outdoor temperatures. If a comfortable temperature can’t be
achieved by the air conditioner, we suggest you use a supplementary heating
device.
9. AUTO-RESTART FUNCTION
Power failure during operation will stop the unit completely. For units without
auto-restart, the OPERATION indicator on the indoor unit will fl ash when the
power is restored. To restart the unit, push the ON/OFF button on the remote
control. For units with auto-restart, the unit restarts automatically with all
the previous settings preserved by the memory function when the power is
restored.
10. LIGHTNING OR OTHER ELECTRICAL INTERFERENCE
Lightning or a car wireless telephone operating nearby may cause the unit to
malfunction. Disconnect the unit from the power and then re-connect the unit.
Push the ON/OFF button on the remote control to restart the unit.
OPERATION TIPS (CONT.)