Filter
Top Products
pRoduCt SpECifiCationS
pRoduCt SpECifiCationS
SS-GSH10C www.goodmanmfg.com 3
SpECifiCationS
GSH10
0903A*
GSH10
0903B*
GSH10
1203A*
Cooling (BTU/h) 87,000 90,000 110,000
Heang (BTU/h) 84,000 84,000 100,000
EER/IEER 11/-- 11/11 11/11.5
Decibels 76 76 77
RLA 25.6 25.6 30.1
LRA 196 196 225
Horsepower 1 1 1
FLA 5.6 5.6 5.6
Liquid Valve Size (“O.D.) ⅝" ⅝" ⅝"
Sucon Valve Size (“O.D.) (7½ tons) 1⅜" 1⅜" 1⅜"
Sucon Valve Size (“O.D.) (10 tons) 1⅝" 1⅝" 1⅝"
Valve Type Sweat Sweat Sweat
Voltage/Phase 208-230/3 208-230/3 208-230/3
Minimum Circuit Ampacity¹ 37.6 37.6 43.2
Max. Overcurrent Protecon² 60 60 70
Min / Max Volts 197/253 197/253 197/253
Electrical Conduit Size ½" or ¾" ½" or ¾" ½" or ¾"
254 254 315
¹ Wire size should be determined in accordance with Naonal Electrical Codes; extensive wire runs will require
larger wire sizes
² May use fuses or HACR type Circuit Breakers of the same size as noted
• Always check the S&R plate for electrical data on the unit being installed.
• Installer will need to supply 1⅛” to 1⅜” or 1⅛” to 1⅝” as appropriate.
• Unit charge with dry nitrogen/helium; must safely dispel holding charge from unit. Evacuate and charge with
R-22 per Installaon Manual.
• Installaon of these units requires the specied TXV Kit to be installed on the indoor coil. THE SPECIFIED TXV IS
DETERMINED BY THE OUTDOOR UNIT NOT THE INDOOR COIL.