Filter
Top Products
ELECTRICAL DATA AT 230V
MODELNUMBER I I I H O,F I I I I
Compressor
-OL1tdoor
Motor
Indoor
Motor
UnitTotaJ
Full Load
J_ps'
Full Load
,a_ps,
MaximumFuseSize,Amps
MinimumCircuitAmpacity
i Based on UL operating conditions.
1Ph
3Ph
1Ph
3 Ph
1 Ph
3 Ph
1 Ph
3 Ph
1Ph
3Ph
1Ph
3 Ph
1 Ph
3 Ph
47
9.9
.8
1.1
11.8
20
14.3
62.5 76/76
.
11.5 12.4/12.4
.8 1.2/1.2
1.3 1.4/1.4
.
13.6 15.0/15.9
. .
25 30/30
. o
16.5 18.1/18.1
°
94/00.5 107/107 129/129 169/169 180
110/T/ 110/88 130/99 137/129 158
18/16 17.8/19.9 23.7/23.7 30.1/28.9 27.9
14.1/11.4 14.1/13.9 14.8/15.0 16.0/20.0 17.6
1.4/1.4 2.1/1.9 _ --1 3.0/1.8 3.1
1.4/1.4 2.1/1.9 2.2/1.9 3.0/1.8 3.1
2.4/2.4 3.1/2.3 3.3/3.3 4.4/3.5 5.1
2.4/2.4 3.1/2.3 3.3/3.3 4.4/3.5 5.1
21.8/19.8 25.0/24.1 25.2/28.9 37.4/34.2 36.1
17.9/15.2 19.3/18.1 20.3120.5 23.4/25.3 25.8
40/40 45/45 55/55 60/60 60
30/25 35/35 35/35 40/50 45
26.3/24 28/29.1 35.1/34.9 45.0/41.5 43.0
21.4/18.1 22.8/21.6 24124 27.4/30.3 30.1
° Data appliesto230V.Unitoperatesat 208/230V. "* 460Vunitsavailableonspecialorder.
= Check nameplate-maybe sllghUydifierer_withalternatecompressor.
IV. INSTALLATION
/
/
FILTER
ROOF MOUNTED
PACKAGED UNIT
WALL S
Typical roof mounted installation
This system is a completely self-contained heating/cooling unit with all components in one cabinet. It
is shipped completely charged with the proper amount of refrigerant. The unit is ready for operation
after connecting duct work, condensate drain and power supply. An adhesive backed soft-foam
weather strip or caulking must be attached on to the horizontal channel between the supply and return
air openings as shown on page 4. A condensate "p"trap must be installed for every unit as shown also
on page 4.
-3-